Clear Filters | 1 - 20 of 637 results

Air Force, Army joint training ensures readiness

Soldiers from the 861st Quartermaster Company line up to enter a C-5M Super Galaxy May 25, 2021 at Joint Base Cape Cod, Massachusetts. The 22d Airlift Squadron participated in a Major Command Service Tail Trainer that flew 11 pallets of cargo weighing 53,411 and soldiers to Fort Campbell, Kentucky. (U.S. Air Force photo by Airman 1st Class Alexander Merchak)
Details Download

Air Force, Army joint training ensures readiness

U.S. Air Force Staff Sgt. Joshua Burke, 22nd Airlift Squadron flight engineer, performs pre-flight checks of the exterior of a C-5M Super Galaxy May 25, 2021 at Joint Base Cape Cod, Massachusetts. Pre-flight checks help ensure the safety and maintenance of the aircraft.(U.S. Air Force photo by Airman 1st Class Alexander Merchak)
Details Download

Air Force, Army joint training ensures readiness

Loadmasters from the 22nd Airlift Squadron strap cargo to a pallet during a Major Command Service Tail Trainer May 24, 2021, at Joint Base Cape Cod, Massachusetts. For one leg of the training, the 22nd AS loadmasters loaded and unloaded cargo weighing 53,411 pounds. (U.S. Air Force photo by Airman 1st Class Alexander Merchak)
Details Download

Air Force, Army joint training ensures readiness

Airman 1st Class Daniel Taylor, 22nd Airlift Squadron loadmaster, prepares to load cargo during a Major Command Service Tail Trainer exercise May 24, 2021, at Joint Base Cape Cod, Massachusetts. For one leg of the training, the 22nd AS loadmasters loaded and unloaded cargo weighing 53,411 pounds. (U.S. Air Force photo by Airman 1st Class Alexander Merchak)
Details Download

Air Force, Army joint training ensures readiness

Airmen from the 22nd Airlift Squadron prepare to load pallets onto a C-5M Super Galaxy during a Major Command Service Tail Trainer exercise May 24, 2021, at Joint Base Cape Cod, Massachusetts. For one leg of the training, the 22nd AS loadmasters loaded and unloaded cargo weighing 53,411 pounds. (U.S. Air Force photo by Airman 1st Class Alexander Merchak)
Details Download

Air Force, Army joint training ensures readiness

Airman Ryan Russell, 22nd Airlift Squadron loadmaster, marshals a Humvee onto a C-5M Super Galaxy during a Major Command Service Tail Trainer exercise May 23, 2021, at Joint Base Cape Cod, Massachusetts. The training allowed aircrew to gain experience in a low-pressure environment. (U.S. Air Force photo by Airman 1st Class Alexander Merchak)
Details Download

Heritage flight, 120,000 pounds of cargo delivered

Airman 1st Class Summer Thomas, 312th Airlift Squadron loadmaster student, tests an oxygen mask and tank in a C-5M Super Galaxy, April 2, 2021, at Joint Base Pearl Harbor-Hickam, Hawaii. An all-female crew assigned to Travis AFB flew the C-5M that delivered 120,000 pounds of cargo from JBLM to Joint Base Pearl Harbor-Hickam, Hawaii. (U.S. Air Force photo by Senior Airman Jonathon Carnell)
Details Download

Heritage flight, 120,000 pounds of cargo delivered

U.S. Air Force Tech. Sgt. Chelsea Boehme, 22nd Airlift Squadron flight engineer, scans a C-5M Super Galaxy April 1, 2021, at Joint Base Pearl Harbor-Hickam, Hawaii. An all-female crew assigned to Travis AFB flew the C-5M that delivered 120,000 pounds of cargo from JBLM to Joint Base Pearl Harbor-Hickam, Hawaii. (U.S. Air Force photo by Senior Airman Jonathon Carnell)
Details Download

Heritage flight, 120,000 pounds of cargo delivered

U.S. Air Force Capt. Keenyn Duncan, right, and 1st Lt. Lily Forlini, center, both 22nd Airlift Squadron C-5M Super Galaxy pilots, walk on the flight line April 1, 2021, at Joint Base Pearl Harbor-Hickam, Hawaii. An all-female crew assigned to Travis AFB flew the C-5M that delivered 120,000 pounds of cargo from JBLM to Joint Base Pearl Harbor-Hickam, Hawaii. (U.S. Air Force photo by Senior Airman Jonathon Carnell)
Details Download

Heritage flight, 120,000 pounds of cargo delivered

U.S. Air Force Capt. Heather Denny, 22nd Airlift Squadron C-5M Super Galaxy instructor pilot and aircraft commander, works on a preflight checklist April 2, 2021, at Joint Base Pearl Harbor-Hickam, Hawaii. An all-female crew assigned to Travis AFB flew the C-5M that delivered 120,000 pounds of cargo from JBLM to Joint Base Pearl Harbor-Hickam, Hawaii. (U.S. Air Force photo by Senior Airman Jonathon Carnell)
Details Download

210402-F-NP696-1031

U.S. Air Force Capt. Keenyn Duncan, 22nd Airlift Squadron C-5M Super Galaxy pilot, stands in front of a C-5M April 2, 2021, at Joint Base Pearl Harbor-Hickam, Hawaii. An all-female crew assigned to Travis AFB flew the C-5M that delivered 120,000 pounds of cargo from JBLM to Joint Base Pearl Harbor-Hickam, Hawaii. (U.S. Air Force photo by Senior Airman Jonathon Carnell)
Details Download

Heritage flight, 120,000 pounds of cargo delivered

Airmen assigned to the 22nd Airlift Squadron from Travis Air Force Base, California, offload 120,000 pounds of cargo from a C-5M Super Galaxy April 1, 2021, at Joint Base Pearl Harbor-Hickam, Hawaii. An all-female crew assigned to Travis AFB flew the C-5M that delivered 120,000 pounds of cargo from JBLM to Joint Base Pearl Harbor-Hickam, Hawaii. (U.S. Air Force photo by Senior Airman Jonathon Carnell)
Details Download

Heritage flight, 120,000 pounds of cargo delivered

A women’s heritage flight patch is displayed on the uniform of Airman 1st Class Summer Thomas, 312th Airlift Squadron loadmaster student, April 1, 2021, at Joint Base Pearl Harbor-Hickam, Hawaii. An all-female crew assigned to Travis AFB flew the C-5M that delivered 120,000 pounds of cargo from JBLM to Joint Base Pearl Harbor-Hickam, Hawaii. (U.S. Air Force photo by Senior Airman Jonathon Carnell)
Details Download

Heritage flight, 120,000 pounds of cargo delivered

U.S. Air Force Tech. Sgt. Chelsea Boehme, 22nd Airlift Squadron flight engineer, scans a C-5M Super Galaxy April 1, 2021, at Joint Base Pearl Harbor-Hickam, Hawaii. An all-female crew assigned to Travis AFB flew the C-5M that delivered 120,000 pounds of cargo from JBLM to Joint Base Pearl Harbor-Hickam, Hawaii. (U.S. Air Force photo by Senior Airman Jonathon Carnell)
Details Download

Heritage flight, 120,000 pounds of cargo delivered

Eighteen ISU-90 containers sit in a C-5M Super Galaxy March 31, 2021, at Joint Base Lewis-McChord, Washington. An all-female crew assigned to Travis AFB flew the C-5M that delivered 120,000 pounds of cargo from JBLM to Joint Base Pearl Harbor-Hickam, Hawaii. (U.S. Air Force photo by Senior Airman Jonathon Carnell)
Details Download

Heritage flight, 120,000 pounds of cargo delivered

A K loader holding six ISU-90 containers moves toward a C-5M Super Galaxy March 31, 2021, at Joint Base Lewis-McChord, Washington. An all-female crew assigned to Travis AFB flew the C-5M that delivered 120,000 pounds of cargo from JBLM to Joint Base Pearl Harbor-Hickam, Hawaii. (U.S. Air Force photo by Senior Airman Jonathon Carnell)
Details Download

Phoenix Spark Lab uses 3D printing to repair firetruck

U.S. Air Force Staff Sgt. Max Estrada, 60th Air Mobility Wing noncommissioned officer of agile manufacturing, creates a replacement gear for a base firetruck using 3D printing March 2, 2021 at Travis Air Force Base, California. By using 3D printing, Estrada was able to replace the damaged part for only five cents and return the firetruck to inventory in one day. (Courtesy photo)
Details Download

Phoenix Spark Lab uses 3D printing to repair firetruck

U.S. Air Force Staff Sgt. Max Estrada, 60th Air Mobility Wing noncommissioned officer of agile manufacturing, creates a replacement gear for a base firetruck using 3D printing March 2, 2021 at Travis Air Force Base, California. By using 3D printing, Estrada was able to replace the damaged part for only five cents and return the firetruck to inventory in one day. (Courtesy photo)
Details Download

Phoenix Spark Lab uses 3D printing to repair firetruck

U.S. Air Force Staff Sgt. Max Estrada, 60th Air Mobility Wing noncommissioned officer of agile manufacturing, creates a replacement gear for a base firetruck using 3D printing March 2, 2021 at Travis Air Force Base, California. By using 3D printing, Estrada was able to replace the damaged part for only five cents and return the firetruck to inventory in one day. (Courtesy photo)
Details Download

Phoenix Spark Lab uses 3D printing to repair firetruck

U.S. Air Force Staff Sgt. Max Estrada, 60th Air Mobility Wing noncommissioned officer of agile manufacturing, creates a replacement gear for a base firetruck using 3D printing March 2, 2021 at Travis Air Force Base, California. By using 3D printing, Estrada was able to replace the damaged part for only five cents and return the firetruck to inventory in one day. (Courtesy photo)
Details Download