HomeNews

Travis Partnership springs Air Force forward with new Aerial Porter Exoskeleton

Airman 1st Class Xaviar Archangel, 60th Aerial Port Squadron aerial porter, and Airman 1st Class Kyle Sunderman, 60th APS ramp serviceman, showcase the capabilities of the Aerial Porter Exoskeleton May 14, 2021, at Travis Air Force Base, California. The Aerial Porter Exoskeleton is a piece of equipment designed to reduce strain when lifting various items. (U.S. Air Force photo by Senior Airman Cameron Otte)

Airman 1st Class Xaviar Archangel, 60th Aerial Port Squadron aerial porter, and Airman 1st Class Kyle Sunderman, 60th APS ramp serviceman, showcase the capabilities of the Aerial Porter Exoskeleton May 14, 2021, at Travis Air Force Base, California. The Aerial Porter Exoskeleton is a piece of equipment designed to reduce strain when lifting various items. (U.S. Air Force photo by Senior Airman Cameron Otte)

Dr. Thomas Sugar, Arizona State University professor, explains what an Aerial Porter Exoskeleton is to Team Travis Airmen May 14, 2021, at Travis Air Force Base, California. The Aerial Porter Exoskeleton is a piece of equipment designed to reduce strain when lifting various items. (U.S. Air Force photo by Senior Airman Cameron Otte)

Dr. Thomas Sugar, Arizona State University professor, explains what an Aerial Porter Exoskeleton is to Team Travis Airmen May 14, 2021, at Travis Air Force Base, California. The Aerial Porter Exoskeleton is a piece of equipment designed to reduce strain when lifting various items. (U.S. Air Force photo by Senior Airman Cameron Otte)

2nd Lt. Germaine Seisa, 60th Logistic Readiness Squadron officer in charge of vehicle management, tries on the Aerial Porter Exoskeleton May 14, 2021, at Travis Air Force Base, California. The Aerial Porter Exoskeleton is a piece of equipment designed to reduce strain when lifting various items. (U.S. Air Force photo by Senior Airman Cameron Otte)

U.S. Air Force 2nd Lt. Germaine Seisa, 60th Logistic Readiness Squadron officer in charge of vehicle management, tries on the Aerial Porter Exoskeleton May 14, 2021, at Travis Air Force Base, California. The Aerial Porter Exoskeleton is a piece of equipment designed to reduce strain when lifting various items. (U.S. Air Force photo by Senior Airman Cameron Otte)

Airman 1st Class Xaviar Archangel, 60th Aerial Port Squadron aerial porter, and Airman 1st Class Kyle Sunderman, 60th APS ramp serviceman, showcase the capabilities of the Aerial Porter Exoskeleton May 14, 2021, at Travis Air Force Base, California. The Aerial Porter Exoskeleton is a piece of equipment designed to reduce strain when lifting various items. (U.S. Air Force photo by Senior Airman Cameron Otte)

Airman 1st Class Xaviar Archangel, 60th Aerial Port Squadron aerial porter, and Airman 1st Class Kyle Sunderman, 60th APS ramp serviceman, showcase the capabilities of the Aerial Porter Exoskeleton May 14, 2021, at Travis Air Force Base, California. The Aerial Porter Exoskeleton is a piece of equipment designed to reduce strain when lifting various items. (U.S. Air Force photo by Senior Airman Cameron Otte)

Brandon Martin, Arizona State University doctor of philosophy student, demonstrates how the Aerial Porter Exoskeleton functions May 14, 2021, at Travis Air Force Base, California. The Aerial Porter Exoskeleton is a piece of equipment designed to reduce strain when lifting various items. (U.S. Air Force photo by Senior Airman Cameron Otte)

Brandon Martin, Arizona State University doctor of philosophy student, demonstrates how the Aerial Porter Exoskeleton functions May 14, 2021, at Travis Air Force Base, California. The Aerial Porter Exoskeleton is a piece of equipment designed to reduce strain when lifting various items. (U.S. Air Force photo by Senior Airman Cameron Otte)

Airman 1st Class Kyle Sunderman, 60th Aerial Port Squadron ramp serviceman, dons Aerial Porter Exoskeleton equipment before demonstrating its capabilities May 14, 2021, at Travis Air Force Base, California. The Aerial Porter Exoskeleton is a piece of equipment designed to reduce strain when lifting various items. (U.S. Air Force photo by Senior Airman Cameron Otte)

Airman 1st Class Kyle Sunderman, 60th Aerial Port Squadron ramp serviceman, dons Aerial Porter Exoskeleton equipment before demonstrating its capabilities May 14, 2021, at Travis Air Force Base, California. The Aerial Porter Exoskeleton is a piece of equipment designed to reduce strain when lifting various items. (U.S. Air Force photo by Senior Airman Cameron Otte)

TRAVIS AIR FORCE BASE, Calif. – The Air Force Life Cycle Management Center and Air Mobility Command partnered with Arizona State University to develop the Aerial Port Exoskeleton, a new piece of equipment set to be used in an official capacity in May 2021, at Travis Air Force Base.

The Aerial Port Exoskeleton helps aerial porters perform their duties with less strain.

“Aerial ports have a high injury rate in the Air Force,” said Tech. Sgt. Landon Jensen, Air Mobility Command innovations, systems and future command manager. “That’s why we are looking into this kind of solution to help porters perform their duties more safely while also helping reduce the risk of injuries, so they are not suffering later in life.”

Travis AFB is currently serving as the test base for the new exoskeleton equipment. If the equipment proves to be beneficial, it may be adopted throughout the Air Force.

“We began looking into this equipment because of the outcome of the 2019 Volpe study,” said Jensen. “The Volpe study was a Department of Transportation study that focused on why retired aerial porters alone were costing upwards of $31 million a year on disability benefits.”

Following the results of the 2019 study, the 60th Aerial Port Squadron leadership looked into working with external parties to develop a solution that would reduce the number of Airmen leaving the service with injuries.

“This project would have been impossible without the help of Arizona State University,” said 2nd Lt. Aaron Cox, Air Force Life Cycle Management Center program manager. “They focused on the development and manufacturing of the exoskeleton, and without their partnership we wouldn’t have been able to develop this technology.”

After a month-long testing period, the Airmen expressed that the suits are a good investment and significantly reduces load bearing.

“This suit’s core function is to help us lift, but can also be used in other ways,” said Airman 1st Class Kyle Sunderman, 60th Aerial Port Squadron ramp serviceman. “During a load, fatigue can be a real issue and these exoskeletons really take a lot of the strain away.”

However, as with any new piece of equipment, it is not without fault, but the Airmen say that they still feel safe.

“There are small things here and there where the suits can be improved to make them more user friendly,” said Airman 1st Class Xaviar Archangel, 60th APS aerial porter. “But overall, I feel safe using the suit.

“These suits are pretty light,” said Archangel. “You hardly notice you are wearing them aside from the bulk around the waist. But other than that, I could honestly wear these for an extended period with no problems, if necessary.”

The Aerial Porter Exoskeleton is still in its prototype stage and will continue to be updated as data is recorded.

Facebook

Twitter

Twitter
Logo
Twitter
Logo
Twitter
Logo
Twitter
Logo
Twitter
Logo
Twitter
Logo
Twitter
Logo
Twitter
Logo
Twitter
Logo
Twitter
Logo
Twitter
Logo
Twitter
Logo
Twitter
Logo
Twitter
Logo
Twitter
Logo
Twitter
Logo
Twitter
Logo
Twitter
Logo
Twitter
Logo
Twitter
Logo
Facebook
Logo
Facebook
Logo
Facebook
Logo
Facebook
Logo
Facebook
Logo
Facebook
Logo
Facebook
Logo
Facebook
Logo
Facebook
Logo
Facebook
Logo
Facebook
Logo
Facebook
Logo
Facebook
Logo
Facebook
Logo
Facebook
Logo
Facebook
Logo
Facebook
Logo
Facebook
Logo
Facebook
Logo
Facebook
Logo
Facebook

Like Us
Twitter
5,177
Follow Us
YouTube Blog RSS Instagram Pinterest Vine Flickr